Protect Main Engine,Less Maintenance.
As granulator belongs to the feed mills host device, firstly manufacturer should have daily maintenance,weekly maintenance and monthly maintenance on the main equipments to ensure the granulator keep good ,stable and non-beating working condition; if the equipment is fault or some wearing parts wear down, especially the driving wheel and spindle,should be maintained immediately and replaced the spare parts, to ensure the normal use of concentric circles on the mould. Instal iron absorption device onto the entrance of feed, so as to avoid metal objects falling into the granulating indoor, which will cause serious damage and make the circular mould crack.
When installing circular mould, should check the granulating indoor driving key, hoop, driving wheel wear-resisting bushing, wear-resistant bushing on the two ends of the compression roller shaft, gap adjusting wheel and feeding scraper, cutter and etc , such easily damaged parts wearing condition , and the replacement should be replaced in a timely manner, to ensure the granulator operate normally. If the hoop wear down,,the circulare mould cannot be holden tightly , it will cause the granulator more vibration and seriously effect the mould service life, and even make the mould cracking; it should be replaced timely, moreover the wearing of feeding scraper will cause decline of the granulator production. Starting from protecting the main engine to minimize maintenance.
View More Products>>
When installing circular mould, should check the granulating indoor driving key, hoop, driving wheel wear-resisting bushing, wear-resistant bushing on the two ends of the compression roller shaft, gap adjusting wheel and feeding scraper, cutter and etc , such easily damaged parts wearing condition , and the replacement should be replaced in a timely manner, to ensure the granulator operate normally. If the hoop wear down,,the circulare mould cannot be holden tightly , it will cause the granulator more vibration and seriously effect the mould service life, and even make the mould cracking; it should be replaced timely, moreover the wearing of feeding scraper will cause decline of the granulator production. Starting from protecting the main engine to minimize maintenance.
View More Products>>
[Back] |